I'm down to just a few sweat shirts and over shirts from the 80s, but they are hanging in there. Both the colors and the fabric. When the subject comes up with friends who ask about a particular shirt I joke, "The cotton was tougher back then". Recently, I've had jeans, shirts, and even socks that didn't make it through a single summer.
Is anyone else freaked out about cleaning their dryer's lint filter given all the new fabric materials? I'm putting together a dryer-vac system to keep it from billowing into the air of our small laundry room.
Her logic seems reasonable but stating that the fibers "return to their original crinkled state" is missing the fact that rayon is also made from cellulose, cellulose II. While Cellulose I(natural) is metastable it can be converted by disolving in lye to a stable form (beta-gllocouse molecolue chain goes from being parallel to being anti parllel which increases the # of hydrogen bonds as well as helping create a more stable 3d structure)
This improve tensile strength much like what happens to fiber when they go through the process of spinning (as well as the options of making an infinite yarn from finite fibers by twisting them together) but on a different scale. regardless to return to original "crinckled state" they need to overcome those forces as well as the forces of the geometry of the knit.
It has been ages since I had clothes shrink on me. To the point that I had assumed something must have gotten better in modern dryers. Is that not the case?
Edit: Quickly searching, this appears to be the case? Specifically modern moisture sensing dryers that stop appropriately goes a long way to never having something shrink on you.
I wish I lived in your world. It is very rare I find a long-sleeved garment whose sleeves are long enough, and it usually only takes a wash or two for them to become too short :(
I should have been clear, I also expected that there were changes to the clothes. I was just more surprised after we ran some sweaters through the cycle on accident, only to find that they did just fine.
I still find it to be the case that most 100% cotton shirts shrink over time (even pre-shrunk) and have switched to blends just to get some more longevity out of them.
I've had the opposite problem where I hadn't had shrinking issues in years until I got a new LG dryer with one of those auto sensing modes that it defaults to. The "smart" feature is terrible. I had a number of shirts shrink on me because it sometimes goes absurdly overboard with the drying.
Once we figured out the problem and stopped using all of the smart features it started working fine. Unfortunately the interface really wants you to use the fancy modes and requires an annoying amount of steps to manually set a drying run. Easily the worst dryer UX I've ever had. I doubt I'll buy another LG appliance, although there are probably plenty of other offenders these days.
I think ours is an LG. Could be something faulty with the sensor in yours, if it is still newish, worth a support call to them to see if they can fix it.
It's not just moisture sensing. Modern dryers also use patterns to prevent shrinking in terms of reducing the heat and then bringing it back as opposed to a constant temperature until dry.
I think a lot of things use pre-shrunk fabric these days. I've got t-shirts that haven't shrunk, and t-shirts that have. Unfortunately a lot of band shirts bought at concerts fall into the latter :(.
I was just offering the amusing anecdote that I have a 30 year old shirt that doesn't shrink. I used to treat it with kids gloves to keep it from doing so.
Note that I fully understand it for the anecdotal weight that it has. That is, basically none. Is fun for conversation, but isn't intended to prove anything.
New clothes also tend to include synthetic fibers that seem to not shrink as much. 100% cotton, or especially wool garments will shrink if you’re not careful, but are becoming increasingly difficult to find.
I had thought this was the main driver, but we washed some of our nicer clothes and they came out just fine. I have a cashmere sweater we accidentally sent through the cycle that didn't shrink.
I find clothes labels are way too conservative. Half of my stuff says don't dry, hand wash only, or cold wash on delicate.
Unless it's a particularly expensive or dry clean only, I just wash at 40 degrees "daily" programme, except for underwear, towels and bedding which go in at 60.
Most stuff is fine. On the rare occasion something gets ruined, I don't get that brand again.
I take the opposite approach: wash everything on the default setting and whatever survives (almost everything) is now confirmed safe for that setting. Keeps things simpler and has the advantage that you can cut of those scratchy labels that are always attached in the most uncomfortable places possible.
That seems to be a nonsensical generalization. A lot of symbols have the negative condition applied with an X. So if you applied it to "generic dry" it would mean do not dry. But it's reasonable when applied to a subset. For instance, do not tumble dry
You would think that, but there is an icon for not using a dryer. There is an icon for all forms of drying. On a clothes line, in the shade, "flat", ...
My eye hit the "It’s not just hot water – here’s why" as one of the first things... em-dash, here's why... I smell the smelly smell, even though I'm not even opposed to it haha.
I am tall enough that shrinking t-shirts is a constant annoyance! (though I have to admit I haven't ever tried the 'conditioner and water' trick, even though I've heard of it before).
Low temperature washes and avoiding tumble dryers works. I've also noticed thicker material t-shirts seem to definitely shrink a lot less! Much thinner cottton t-shirts seem to shrink a lot more, my mental model is that there's less material so when it bunches together to it's "happy place", it ends up a lot smaller. I have no evidence for this though.
Any other tips from people here? Also, has anyone actually tried stretching with hair conditioner?
Hang-dry your tees. It's a slight annoyance vs just bombing everything into the dryer, but it's very worth it to not have sleeves that are too short. I usually hang mine on the shower's curtain rod to dry.
And frankly, this seems like less effort than trying to apply some hack to unshrink them after the damage is done.
Denim and duck cotton tend to "break in" after a few wearings. This happens with a lot of cotton work clothes and also with a good pair of technical or work boots. They tend to mold themselves to your body shape. It doesn't happen at all with nylon work pants like the ones Carhartt makes.
tl;dr; you can't, cause the fibers are crinckled up in a lower energy state, but try soaking in 1 tablespoon of hair conditioner per liter of lukewarm water and stretch.
Is anyone else freaked out about cleaning their dryer's lint filter given all the new fabric materials? I'm putting together a dryer-vac system to keep it from billowing into the air of our small laundry room.
This improve tensile strength much like what happens to fiber when they go through the process of spinning (as well as the options of making an infinite yarn from finite fibers by twisting them together) but on a different scale. regardless to return to original "crinckled state" they need to overcome those forces as well as the forces of the geometry of the knit.
Edit: Quickly searching, this appears to be the case? Specifically modern moisture sensing dryers that stop appropriately goes a long way to never having something shrink on you.
Similar improvements have been made to improve colorfastness. Mixing new reds and whites used to consistently produce pink. Not anymore.
I have some semi-recent pinkified cloths.
That said, washing everything on cold water and low temps in the dryer works pretty well at extending the life of cloths.
Once we figured out the problem and stopped using all of the smart features it started working fine. Unfortunately the interface really wants you to use the fancy modes and requires an annoying amount of steps to manually set a drying run. Easily the worst dryer UX I've ever had. I doubt I'll buy another LG appliance, although there are probably plenty of other offenders these days.
Note that I fully understand it for the anecdotal weight that it has. That is, basically none. Is fun for conversation, but isn't intended to prove anything.
Might have been our new hangers.
On that last, I almost forgot I had direct evidence. We visited a place that shrank some of our clothes that we had washed many times back home.
https://www.ihateironing.com/blog/wp-content/uploads/2016/07...
Unless it's a particularly expensive or dry clean only, I just wash at 40 degrees "daily" programme, except for underwear, towels and bedding which go in at 60.
Most stuff is fine. On the rare occasion something gets ruined, I don't get that brand again.
We have a lot of "shrinkage" in our house, that I am convinced is more due to both of us uhh "growing" rather than the clothes shrinking ;)
You can imagine, it's a delicate subject
Low temperature washes and avoiding tumble dryers works. I've also noticed thicker material t-shirts seem to definitely shrink a lot less! Much thinner cottton t-shirts seem to shrink a lot more, my mental model is that there's less material so when it bunches together to it's "happy place", it ends up a lot smaller. I have no evidence for this though.
Any other tips from people here? Also, has anyone actually tried stretching with hair conditioner?
And frankly, this seems like less effort than trying to apply some hack to unshrink them after the damage is done.